Vertical Hollow Shaft Motor (WP1_IP23)

Inquire

Structure

TYPICAL WP-1 VERTICAL HOLLOW SHAFT CONSTRUCTION

1.Durable light weight FRP top cover

2.Deep set oil bath lubrication system for 320TP frames and above

3.Dual Chrome lifting lugs

4.Oversized cast iron conduit box

5.U.L approved insulation system, NEMA MG-1 Part 31 Inverter Duty, Non Hydroscopic Epoxy Varnish, Double VPI Treatment

6.Precision cast "P" base design which allows motor to mount without taking of rodent screen

7.Dual air flow system. Lower bracket has multiple air-ducts which is conducive for superior cooling throughout the motor with non-corrosive rodent screens upper & lower

8.Precision balanced die cast aluminum rotor with anti-rust paint finish. Rotor is made from 600 grade silicon steel to minimize core loss

9.Class F insulation with Class B Temp Rise @ 1.15 S.F

10.All Stainless Steel full data nameplate

11.Twist spigot oil drain

12.Oversized one piece sight glass

13.Upper bracket machined for 175% EHT on 440 frames and above.

14.Handle grip oil fill plug for ease of removing and reinstalling

15.12 ball "Ball Type" Non Reverse Ratchet made from ductile iron for superior rigidity

Key Advantages of WP-1 Vertical Hollow Shaft Construction

Enhanced Cooling Efficiency
The advanced dual airflow ventilation system improves heat dissipation throughout the motor, helping maintain stable performance and extending equipment lifespan under continuous operation.
Heavy-Duty Structural Reliability
High-grade cast iron construction combined with precision-engineered components ensures superior mechanical strength, vibration resistance, and long-term durability in demanding industrial environments.
Optimized Energy Efficiency
Premium silicon steel laminations and precision-balanced aluminum rotors effectively reduce core loss, improving operational efficiency while lowering energy consumption.
Excellent Corrosion Protection
Non-corrosive rodent screens, anti-rust rotor coating, stainless steel nameplates, and tropicalized insulation provide outstanding resistance against moisture, dust, and harsh environmental conditions.
Reliable Electrical Performance
Featuring UL-approved Class F insulation, double VPI treatment, and NEMA MG-1 Part 31 inverter-duty capability, the motor delivers stable and dependable electrical operation for critical pump systems.
Easy Maintenance Design
Oversized sight glass, twist spigot oil drain, and ergonomic oil fill plug simplify routine inspection and maintenance, reducing downtime and service costs.
Superior Operational Safety
The durable non-reverse ratchet assembly and precision-machined upper bracket design enhance operational stability and provide additional protection for vertical pump applications.

Model Features

Mechanical Product Features

• Proven American Frame Design

• Unsurpassed Dual Air Flow Ventilation System

• High Grade All Cast Iron Construction

• Top Cover of Durable Fiberglass Reinforced Plastic

• Handle Grip Oil Fill Plug

• Deep Set Oil Bath Lubrication frames 440TP

• 5810P - Oversized Oil Sight Glass

• Superior Ball Type Ratchet Assembly

• Stainless Steel Louvered Rodent Screens

• Precision Balance of Rotating Assembly

• Upper Bracket with Spacer Machined for Installation of EHT 175%

Engineered with heavy-duty mechanical construction and advanced electrical protection technology, the WP1 IP23 Vertical Hollow Shaft Motor delivers exceptional durability, cooling efficiency, and operational stability for demanding vertical pump applications. Its precision-balanced rotating assembly and high-grade cast iron structure help minimize vibration, reduce maintenance, and extend service life.

Electrical Product Features

• UL Inverter Duty Wire

• Stainless Steel Full Data Nameplate

• Premium Class "F" Insulation

• Double VPI Treatment

• MG - 1 Part 31 Capable

• Space Heaters and Thermal Protected

• Full Data Pack Available Upon Request for each HP

• Tropicalized insulation

• Low Core Loss Silicone Laminations

• UL Insulation System Approval Rating

Equipped with premium Class F insulation, double VPI treatment, and inverter-duty capability, the motor ensures reliable performance even in harsh industrial environments. The optimized low core loss design improves energy efficiency while providing dependable continuous operation for irrigation, municipal water supply, industrial pumping, and deep well systems.

Specifications

VERTICAL HOLLOW SHAFT MOTOR DATA

NEMA STANDARD

VERTICAL HOLLOW SHAFT MOTOR DATA

IEC STANDARD

Technical Strength

PRECISION BALANCING PROCEDURES

Wangyang’s vertical hollow shaft motors are to have precision balancing to ensure premium performance and long motor life for each and every motor. We test our motors with vibration monitors to detect different levels of vibration to allow our machinist to make corrections if necessary. All rotating parts are balanced individually before the motor is assembled.

In certain circumstances even if all parts are balanced to normal tolerances, when assembled to form a complete motor and rotate in the same direction, this may cause cumulative error. Therefore we test the complete unit as well to a precision balance of .00085" to ensure a smooth well balanced motor.

1.SMALL ROTATING PARTS

DYNAMICALLY BALANCED

Rotor, thrust bearing, coupling, and backstops are all dynamically balanced on an electronically controlled machine.

2.DYNAMICALLY

BALANCED ROTOR

Dynamic balanced rotor assembly is similarly perfected on electronic machine that measures correction.

3.ENTIRE MOTOR CHECKED FOR

BALANCE TO .00085" VIBRATION

Vibration monitor measures overall movement of assembled motor. Precision tolerance of only .00085".

4.REFINED BALANCE OF

ASSEMBLED MOTOR COMPLETED

Precision balancing is achieved in step 3 by tempering lead weights in upper bearing mount.

PREMIUM QUALITY COMPONENTS & ACCESSORY PARTS

OVERSIZED THRUST BEARINGS TO WITHSTAND

DEMANDING THRUST LOADS

Wangyang vertical hollow shaft motors thrust bearings are oversized for long life. Trouble free Bearing operation is assured with visible oil levels, low friction bronze bearing retainer, precision cast bearing housing, deep oil bath, and precision balanced bearings.

BEARING OPTIONS FOR EXTRA HIGH THRUST APPLICATIONS

Where higher thrust requirements exists, Wangyang offer options to match the thrust requirements for long term operation. We took provisions for stacking bearings by having a "spacer bearing" need only be removed and a matched bearing installed in its place to make an easy modification. For even a higher thrust demand, spherical roller bearings with copper cooling tubes are furnished.

BALL TYPE" NON REVERSE RATCHET

LOCKS INSTANTLY AGAINST PUMP SHAFT BACKSPIN

When motor current ceases, water column receding to normal water level causes pump backspin. The preferred ball type non reverse ratchet is the best design to prevent this backspin. Possibility of reverse operation is also eliminated. The ball type consists of an outer rotating member with a series of channels positioned at a compound angle outwardly and upwardly. When the motor starts, the balls rise by centrifugal action free of the ratchet. When the motor is shut — off and as the drop slows down, the free of rolling balls drop down their respective channels, instantly locking against reversal of the pump shaft when the motor reaches a dead stop. Wangyang ratchets are made from ductile iron and the balls are made from durable steel.

Dimension

VERTICAL HOLLOW SHAFT MOTOR DIMENSION

NEMA STANDARD WP1

VERTICAL HOLLOW SHAFT MOTOR DIMENSION

NEMA STANDARD TEFC