1.Type XS split case pumps work stably with less noise and vibration, may be properly work at raising speed due to short spacing between both side supports, thus they can be widely used.
2.The pipelines arrangement of type XS split case pump looks simple and beautiful due to inlet and outlet at the same line.
3.The same rotor of type XS split case pumps can be operated in reverse direction to avoid damage to the pumps by water hammer.
4.Unique design of high temperature form: using middle support, thickening the pump casing, using cooling seals and oil lubrication bearing, make XS split case pump suitable for working at 200℃, especially for supplying heating net system.
5.Type XS split case pump can be vertically or horizontally mounted according to different working condition, with mechanical seals or packing seals.
6.With industrial design, the outline of XS split case pump is clear and beautiful in line with modern aesthetics.
7.The efficiency of XS split case pumps are 2% - 3% higher than the same type pumps due to adopting advanced hydraulic model and thus reduce the operating costs significantly.
8.The NPSHr of type XS split case pumps are 1 - 3 meters lower than the same split type pumps which reduced the foundation costs and extend the using life.
9.Choosing import brand bearing, and other parts material chosen by customer, make the pump suitable for any operation condition and reduce the maintenance cost significantly.
10.It is not necessary to adjust mechanical seals, so it is very easy and simple to replace them.
11.It is rapid and simple to assemble and dismount the rotor parts due to using elastic prestress assembling.
12.It is unnecessary to make adjustment to any clearance when assembling.