Why vertical turbine pumps are used?

The biggest characteristic of vertical turbine is to make motor and pump into one. Vertical turbine pumpis a pump that pumps and transports water into underground water wells. It is widely used in farmland irrigation, industrial and mining enterprises, urban water supply and drainage and sewage treatment. Because the motor dives into the water at the same time

Outline:

• What is vertical turbine pump?

• What are the advantages of vertical turbine pump?

What is vertical turbine pump?

vertical turbine is to make motor and pump into one. Vertical turbine pump is a pump that pumps and transports water into underground water wells. It is widely used in farmland irrigation, industrial and mining enterprises, urban water supply and drainage and sewage treatment. Because the motor is submerged at the same time, and because the motor is submerged at the same time, the structure of the motor is more special than that of the general motor. Its motor structure is divided into four types: dry, semi-dry, oil-filled and wet.

Before starting the pump, the suction pipe and the three-dimensional turbine pump must be filled with liquid. After opening the pump, the impeller rotates at a high speed. The liquid in the impeller rotates together with the blade under the action of centrifugal force and flies out of the impeller. The liquid emitted slows down gradually in the diffusion chamber of the pump housing of the three-dimensional vertical turbine pump, and the pressure increases gradually. Then it flows out of the pump outlet and the discharge pipe. At this time, a vacuum low pressure zone without air and liquid is formed at the center of the blade because the liquid is thrown around. Under the action of the atmospheric pressure on the surface of the pool, the liquid in the liquid pool is flowed into the three-dimensional turbine pump through the suction pipe, and the liquid is continuously sucked up from the liquid pool and continuously flowed out from the discharge pipe. The basic parameters of three-dimensional vertical turbine pump include flow rate, head, pump speed, matching power, rated current, efficiency, outlet pipe diameter and so on. The application scope of three-dimensional vertical turbine pump includes mine rescue, construction drainage, water and agriculture drainage and irrigation, industrial water circulation, water supply for urban and rural residents, and even disaster relief.

Vertical turbine pump consists of three basic parts: the working part with filter net, the lifting pipe part with drive shaft and the drive device with motor. The working part and the riser pipe are located in the well, and the transmission device is located above the wellhead. When the impeller rotates, the pressure head and velocity increase at the same time, and the flow through the channel of the guide shell is directed to the secondary impeller, which successively flows through all impellers and guide shells, so that the pressure head increases with the flow through the impeller at the same time. The lift can reach 26-138 m liquid column. Vertical turbine pump is not limited by liquid level concentration and is widely used in mining, petroleum and other industries. Vertical turbine pump pumps provide water for urban, industrial and mining enterprises and farmland irrigation. The products have the advantages of high single-stage head, advanced structure and manufacturing technology, low noise, long service life, high efficiency and reliable operation.

What are the advantages of vertical turbine pump?

Vertical turbine pump has a lot of use value, and most of the time it is presented through its characteristics. For example, the condition of integration of motor and water pump of vertical turbine pump enables it to work in water; vertical turbine pump has no special requirements for well pipe and riser pipe, which can meet its usage in steel pipe well, ash pipe well, earth well and so on. The motor and water pump of the vertical turbine pump are integrated, which can operate under water safely and reliably. Vertical turbine pump is easy to install, use and maintain. It covers a small area and does not need to build pump house. Vertical turbine pump has simple structure and saves raw materials. Vertical turbine pump has no special requirement for well pipe and riser pipe. Steel pipe well, ash pipe well and earth well can be used. Under the permission of vertical turbine pump pressure, steel pipe, rubber pipe and plastic pipe can be used as lifting pipe.

Vertical turbine pumps are usually used vertically, such as in general wells. Vertical turbine pump is a heat-resisting pump which is directly connected with the motor. The temperature of hot water can reach 100 C. Vertical turbine pump is an effective tool for extracting geothermal water. Geothermal is the cheapest, cleanest and inexhaustible latest energy source. Now it is widely used in heating, medical treatment, bathing, breeding, planting, industry, agriculture, factories, mining enterprises, entertainment services and health facilities. And many other aspects. Vertical turbine pump pump is a new product of geothermal water from dike, which has many advantages such as simple structure, reliable operation, no noise, excellent performance, high efficiency, convenient installation and maintenance, heat resistance, anti-corrosion, anti-aging and so on.

With the increasing use of vertical turbine pump in China, because of the particularity of its workplace, there are significant differences between its functional characteristics and its use only for general products. These differences are also important reasons for the long-term and stable development of vertical turbine pump. Many customers do not know much about the role of vertical turbine pump.

Nanjing Wangyang Pumps Co., Ltd.not only provide a good product, but also provide high quality service. If you are interested in our products, you can contact our company as soon as possible For deep well pump, Submersible Deep Well Pump is also applicable